How To Paint Wood Floors

Step 1

Lightly sand the entire floor using a belt or orbital sander and 60-grit sandpaper. If it is a very large area, the best way to sand the area is using a drum floor sander.

Step 2

Clean the area thoroughly! Vacuum the surface and wipe it down with hot soapy clean water and a damp cloth. Wipe with a dry towel and let the hardwood flooring dry completely before you begin with the primer.

Step 3

Apply a coat of primer to the surface of the wood planks. Allow the primer to dry completely.

Step 4

Begin by applying the first coat of paint in the colour of your choice in the direction of the wood grain. Allow the floor to fully dry before applying the second coat. For the best results, wait about 8 hours in between each coat.

Step 5

Apply a thin coat of poly to the surface. Again, make sure to let the coats of poly dry thoroughly before applying the next coat. Make sure to do at least 2 coats of poly for proper protection.